8" Scaffold Locking Caster Wheel Accessory For
Construction Contractor Equipment Portable Masonry Scaffolding Tool Systems 500
For Rolling Scaffolds the Following Guidelines Apply:
* Riding a rolling tower is very hazardous. The SIA, and the SSFI do
not recommend nor encourage this practice. * Casters with plain stems
shall be attached to the Frames or adjustment srcew by pins or other sutible
means. * Use adjusting screws or other approved methods instead of
blocking to adjust to uneven grade conditions. * No more than 12"
of the screwjack shall extend between the bottom of the adjusting nut and the
top of the caster. * Wheels or casters shall be locked when scaffold is
in use. * Joints shall be restrained from separation. * Use horizontal
diagonal bracing near the bottom and at 20' intervals measured from the
rolling surface. * Do not use brackets or other platform extensions
without compensating for the overturning effect. * The top platform
height of a rolling scaffold must not exceed four times the smallest base
dimension (CAL/OSHA and some government agencies require a ration of 3 to 1).
* Cleat or secure all plank. * Secure or remove all materials and
equipment from platform before moving. * Do not attempt to move a
rolling scaffold without sufficient help - watch out for holes in floor or
overhead obstructions - stabilize against tipping.
Return To Thumbnails
Home | Product Lines
Items | Contact Us
© 1991-2010 Capitol City Scaffolding & Equipment Company, Inc. All rights
Services, prices, and terms subject to change without notice.